CONTENTS:

Divider

ABOUT THE STEDI TYPE X™ PRO

You only need one glance to realize that the sky was the limit when designing the STEDI TYPE-X™ PRO (Registered Design Number 201814836 & Registered Trademark)

Back in 2016, we released the original Type-X™ and completely disrupted the high performance driving light market. If you haven’t heard about the legendary reputation of V1.0 TYPE-X™, start by checking out the Youtube comparisons. With the introduction of our PRO Edition, we are yet again redefining the auxiliary driving light category. Our all-new Type-X™ PRO edition epitomizes our commitment to maximizing light output and reliability at levels that surpass the most respected players in the industry.

STEDI Type X Pro LED Driving Spot Lights 8.5 Inch

User Guide Shop Now

Divider

WHATS IN THE BOX

  • 2 x STEDI Type-X PRO LED Driving Lights
  • 2 x Protective STEDI Black Out Covers 
  • 2 x Grey Colour Rings 
  • 2 x Orange Coloured Rings
  • 1 x Smart High Beam Wiring Harness DTP-2 Sealed Connectors
  • H4 + HB3 adapter plugs to high beam
  • 60A Relay, Fuse, Switch
  • Complete Stainless Steel fastener kit. 
  • Wiring & Fitting Instructions 

Divider

KEY SPECIFICATIONS

LED 37 x Oslon High-Flux LED
RAW LUMENS 26,270 (Pair)
TESTED LUMENS 15,870 (Pair) 
AMP DRAW  10.4A @ 13.2v (each)
POWER DRAW 137W
CANDELA
1,334,025cd 
BEAM PATTERN 6 x Spread 31 x Pencil Beam
INGRESS PROTECTION IP68 | Submersible up to 3m
COLOUR TEMP (CCT)  5700K
VOLTAGE COMPATIBILITY  12v & 24v 
LUMEN MAINTENANCE  50,000 LM-80
WEIGHT 2.860kg (each)
PHOTOMETRIC DATA
10 M 13,340 Lx
50 M  533 Lx
200 M 33 Lx
300 M 14 Lx
400 M 8 Lx
1,000 M 1.3 Lx
1,155 M 1 Lx

Divider

EXPLODED DIAGRAM

Installation of the TYPE X Pro is quite simple and is easiest explained via the below exploded diagram. Most will find it easier to set up the bracket first and once fitted, install the lights. Note that compared to our TYPE X V1, these do not require the shock dampeners to be fitted.

For wiring instructions, Click Here.

STEDI Type X Pro Exploded Diagram

Divider

NIGHT DRIVING FOOTAGE

Divider

ACCESSORIES & PERSONALIZATION

COLOUR CHANGING RINGS

New to our STEDI Type X Pro driving lights are the colour changing rings that will give you the option to match the accents around your vehicle or even just do something a little unique. In the box, we included Grey and STEDI Orange with optional extras including Red, Blue, Pink, Green now with Yellow & Sandy taupe sold separately.

STEDI Type X Pro Colour Ring Green LandCruiser 200 SeriesSTEDI Type X Pro Colour Changing Rings Yellow with Carbon CoverSTEDI Type X Pro Blood Splatter Ford Ranger Raptor

Shop Now

Divider

COMPATIBLE COVERS

Type X PRO comes included with the blacked-out "STEDI" branded covers. All covers from our generation 1 Type X are compatible with the new Type X PRO. You can order the optional clear, amber, wicked smile, blue and more covers from the below "shop now" link.

STEDI Type X Pro Covers

Shop Now

Divider

FLOOD COVER COMPARISON SLIDER

  Type X Pro Spot »   Type X Pro Single Flood »   Type X Pro Dual Flood »

Divider

TYPE X PRO OPTIONAL ANTI-THEFT KIT

If you looking for an option to minimize the prospect of your Type X PRO getting stolen, we offer a comprehensive anti-theft kit. 

STEDI Type X Anti Theft Kit

Shop Now

Divider

The anti-theft kit consists of the following fasteners; 

  • 1 x M10 Nut Security Key
  • 1 x M8 Bolt Security Key 
  • 4 x 8mm Bolts (Long) -  Used to secure the brackets to the sides of the Type X (fitted to the adjustment bolt position) 
  • 2 x 10mm Nuts - Used to secure the bracket to the vehicle in conjunction with the included shank bolt.