Ford Everest LED Upgrade Guide

Ford Everest LED Upgrade Guide

FORD EVEREST LED BULBS

With the different model years & trims available for the Ford Everest, you may find a mix of factory headlights fitted to your vehicle. The higher trims will generally have HID in both the high and low where as the mid to entry trims can be fitted with halogen globes in one or even both headlights. We have put in the homework for you in determining the appropriate LED upgrades for your model which can be selected via the image below. 

 

Ford Everest LED Headlight Upgrades

 

 

FORD EVEREST | LED HIGH BEAM UPGRADE

Upgrading the high beam on the Everest is a straightforward process; the only difficulty you will encounter is negotiating your way through a tight engine bay. As you can see from the photos below the factory halogen high beam achieved a peak intensity of 4,279 Lux. Once swapped to our Copper Head LED upgrade we were able to achieve a massive gain of 7,702 Lux which is an 80% increase in peak intensity. 

Ford Everest LED Headlight Upgrade

Ford Everest LED Headlight Upgrade   Ford Everest LED Headlight Upgrade installation guide

 

 

FORD EVEREST | LED PUDDLE LIGHT ASSEMBLY

The LED Puddle Light upgrade for the Everest follows the exact same process as the Ranger models. Slip a flat head screwdriver into the tabs situated on each side of the light to remove the unit. Unplug both the positive and negative wires to the factory light. Our puddle light upgrade uses the same method for installation, we took the extra precaution of applying electrical tape around the positive wire to prevent the cables from crossing when fitted back inside the mirror.

Ford Everest LED Puddle Light Assembly

Ford Everest LED Puddle Light Assembly   Ford Everest LED Puddle Light Assembly installation guide    Ford Everest LED Puddle Light Assembly installation video

 

 

FORD EVEREST | LED LICENSE PLATE LIGHT ASSEMBLY

With the option to upgrade the globes inside the OEM license plate housing, we also offer a complete drop-in replacement that offers a smoother beam reducing glare in reversing cameras with easy installation.

Ford Everest LED License Plate Light Assembly

Ford Everest LED License Plate Light Assembly   Ford Everest LED License Plate Light Assembly installation guide   Ford Everest LED License Plate Light Assembly installation video

 

 

FORD EVEREST | LOWER GRILLE LIGHT MOUNT BRACKET

Suitable for the Ford Ranger Raptor (2019+), the lower grille bracket offers the ability to mount auxiliary driving lights without the need for an aftermarket bullbar. With easy installation and next to no modifications, this bracket will support either the 21 inch ST1K or ST3K LED light bars to offer performance lighting with a sleek, minimal fitment.

Ford Everest Lower Grille LED Light Bar Bracket

Ford Everest Lower Grille LED Light Bar Bracket   Ford Everest Lower Grille LED Light Bar Bracket install guide

 

 

FORD EVEREST | HIGH BEAM ADAPTOR

Our new piggyback adaptor specific for the Ford Ranger PXII/PXIII and Everest will remove any hassle from the installation of any of our driving light harness kits.

Ford Everest High Beam Adaptor

Ford Everest High Beam Adaptor   Ford Everest High Beam Adaptor install guide

 

 

FORD EVEREST | SWITCH FASCIA PANEL

The Ford Ranger, Ranger Raptor and, Everest (2015-current) present limitations for switches when using additional accessories; whether it be auxiliary driving lights, winches, and so on. We now offer our switch fascia which is compatible with the above-listed models that will offer the ability to run 4 of our square-type push button switches. Expect OEM-like fitment and under 1 minute for installation of the panel itself.

Ford Everest Switch Fascia Panel

Ford Everest Switch Fascia Panel   Ford Everest Switch Fascia Panel installation guide

 

 

FORD EVEREST | 'RALLY' NUDGE BAR

Our new STEDI Rally Bar is the re-imagining of the Ford Ranger Nudge Bar. Featuring a large 63mm diameter, ergonomically designed tube made out of durable 2mm stainless steel, this lightweight nudge bar can securely hold up to 30kg without any compromise. Designed for a seamless fully reversible and non-intrusive install (grill dependent), the Rally Bar provides a higher mounting position than the factory counterpart, not to mention the optimal setup for a killer lighting combination.

Ford Everest 'Rally' Nudge Bar

The STEDI Rally Bar is also a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduce excessive mounting equipment, and when partnered with the Rally Bar, provides the perfect solution for hosting your ideal light combination on your Ford Ranger.

Ford Everest Rally Nudge Bar   Ford Everest Rally Nudge Bar installation guide   Ford Everest Rally Nudge Bar installation video