HOW TO WIRE LED LIGHT PUSH BUTTON & ROCKER SWITCHES
Video tutorial covers how to wire our Toyota Push Button switches to the STEDI Wiring harness which has RED, YELLOW, BLACK switch wires. This tutorial is also valid for our older Nissan, Mitsubishi, VW Amarok switches.
Please be mindful that this instructional video is specifically for customers using the STEDI wiring harness. This is very important as our Quick Fit Harness has built in electronics to deal with the negatively switch wiring found on some popular Toyota models, which ensure the switch lights operate correctly without needing to install a second relay.
Below we have provided a useful diagram that shows all of the referencing used in our tutorial for an easy read alternative.
THE LEGEND BELOW IS FOR OUR HARNESS WHICH COME WITH YELLOW / RED / BLACK WIRES COLOURS
| SWITCH WIRE COLOUR | STEDI WIRING KIT |
| GREEN WIRE TO | YELLOW WIRE |
| RED 1 TO | RED WIRE |
| RED 2 (OPTIONAL) | VEHICLE DASH CIRCUIT |
| BLACK TO | BLACK |
THE LEGEND BELOW IS FOR OUR HARNESS WHICH COMES WITH WHITE / BLUE / BLACK WIRES COLOURS
| SWITCH WIRE COLOUR | STEDI WIRING KIT |
| GREEN WIRE TO | WHITE WIRE |
| RED 1 TO | BLUE WIRE |
| RED 2 (OPTIONAL) | VEHICLE DASH CIRCUIT |
| BLACK TO | BLACK |
RANGER & BT50 PUSH SWITCH | WIRING DIAGRAM
NISSAN PUSH SWITCH
OLD STYLE & NEW STYLE
TOYOTA PUSH BUTTON SWITCH DIAGRAM
MODERN STYLE (SHORT) & OLD STYLE (TALL)
VW AMAROK SWITCH | WIRING DIAGRAM
DMAX & COLORADO SWITCH | WIRING DIAGRAM
OLD TYPE
MODERN STYLE
CARLING TYPE ROCKER SWITCH | WIRING DIAGRAM
