Hit the ‘on’ button and our ST2K-16L 40.5” Super-Drive LED light bar’s motor-sports pedigree instantly becomes evident. Compared to traditional optical systems, our innovative Super Spot reflectors system delivers unmatched light intensity at the mid to long range.
The unconventional use of 16 x 15W rearward facing high powered LEDs allows us to achieves new levels of beam intensity & control that simply isn’t possible with traditional reflector designs. The beam characteristics are designed to start working past the point where your high beam ends. The mid to long range end of the beam opens to provide very effective spread illumination at critical zones (11 & 1 O’clock) across the tarmac and road shoulders.
If the ST2K were illuminated against a wall at close range, what you will expect to see is narrow, sharp wide horizontal spot beam, with almost zero light wasted on the vertical plane. Rather than a traditional tight round spot beam, the reflector design along with the curved housing produces a wide-angle spot.
ADVANTAGES OF A LATERAL SPOT BEAM
- Excellent well rounded mid to long range illumination
- Significantly minimises adverse reflection from road signs
- Eliminates light wasted on illuminating tree tops (won’t disturb sleeping koalas)
- Excellent alternative to HID, without the associated downsides
- The beam is 90m wide at approx 250m
- LED Parking / Position Light Function
- Breather allows pressure equalization when rapid heat up and cool down cycles occur.
- Anodized Polyester Powder Coat
- Weatherproof Deutsch® DT2 Connector.
- Includes adjustable sliding mounts and side brackets
- Includes our Easy-Fit Plug & Play High Beam Wiring Harness with HB3 & H4 adapter (Compatible with both negative and positive switched vehicles.
- Protected against reverse polarity
- Shock proof, IP68 waterproof, UV Shielded
- Protected against RFI / EMC Interference
- Voltage & current surge protection
- Pulse Width Modulation Thermal Management
|MAIN BEAM LED COUNT||16 x 15W|
|VOLTAGE||12V & 24V|
|LENS MATERIAL||OPTICAL GRADE, HARD COATED LEXAN|
|HOUSING MATERIAL||6063 EXTRUSION|
|AMPERES||16.1A @ 13.2v|
|SPOT BEAM||DRIVING BEAM|
|OPERATING TEMP||-40˚C ~ +150˚C|
|CERTIFICATES||E-Mark R10 | CE √|
What’s in the box
- 1 x 40.5" ST2K-16L LED Light Bar
- 2 x Steel Side Brackets
- 8 x Adjustable Sliding Brackets
- Easy-Fit High Beam Wiring Kit | HB3 & H4 piggy-back included.
- Wiring Instructions
- Comprehensive 304 Stainless Steel fasteners