Introducing STEDI's new and innovative curved Philips LED Light Bar. The new curved design provides the ultimate in field of view coverage in any open road or off-road situation.
Featuring a whopping 40 individual 3 WATT Philips LED Diodes, with a combined power output of 120watts!
Everything needed for installation is packaged in, which includes;
- Stainless Steel Mounting Hardware
- 3mm Stainless Steel Side Brackets!
- Nickle Plate Cable Plug
- EMC and RFI Interference cancellation circuitry built in. Guaranteed not to interfere with other radio equipment.
- Military Grade Pressure Ventilation
- PWM thermal management allowing us to drive the LEDs to their limit whilst keeping operating temps within spec
- 5 YEAR Replacement Warranty
WHY CHOOSE STEDI HIGH INTENSITY LIGHTS BARS?
Not all light bars are created equal. Whilst some light bars on the market place may look similar, the performance and longevity are light years apart.
Here are just some of the reasons why STEDI LED LIGHT BARS are superior.
- We use the highest quality UV rated polyester powder coating, to ensure our light bars paint finish won’t turn bronze from sun like our competitors’ products do.
- Our primary lenses are made from an optically engineered and UV stabilized hardened PC. Inferior light bars use a cheap run of the mill PC in order keep costs down, which will turn yellow and fog with use.
- Our bars use proprietary Thermal Paste behind PCB board which yields 13% extra cooling capabilities, to ensure long term LED stability
- Industries leading electronic coating on PCB to ensure electronics are vibration proof.
- Precision Engineered Reflector Optics to ensure maximum light projection rated at 97%
- We use the highest quality LED circuitry drivers to ensure the LED receive maximum possible power. Unlike poorly built lights, which under drive LEDs to maintain stability.
|LED CHIPS||3w x 40 Philips Lumiled|
|BEAM TYPE||Spot/Flood Beam|
|BEAM ANGLES||19 Degrees (S) | 65 Degrees (F)|
|DUSTPROOF & ANTI-VIBRATION||YES|
|MOUNTING BRACKET||3mm STAINLESS STEEL|
|HOUSING MATERIAL||Aluminum Extrusion|
|LIFE SPAN||50000+ HOURS|
|AMP DRAW (DC)||6.8A 13.2v|
|BEAM DISTANCE @ 1 Lux||249m|
What's in the box
What’s in the box
- 120 WATT 22inch Philips LED Light Bar
- Stainless Steel Nuts, Washers and Bolts
- Quick Fit High Beam Plug and Play Wiring Harness
- HB3 & H4 Piggy Back Adaptors.
ReviewsWrite a Review
Review by Athol
As Good As It Gets From Start To Fit
Review by Draytie
Review by agentang
Better than I expected
Review by Rich B
Review by Dave
I didn't care about distance, but was pleasantly surprised at having well over 100-150m of almost daylight, better than twice my braking distance at 110kph.
Does the job very well.
Thanks. (Posted on 29/04/2016)
Review by David
Review by SCMG