H4 CANBUS Cancellation Module for LED Conversion


Special Price: $24.99

rrp: $24.99
H4 CANBUS Cancellation Module for LED Conversion is available for purchase in increments of 1


H4 CANBUS Module to by pass vehicle computer systems that deactivate headlights due to higher or lower current draw.


Our H4 Canbus Error Cancellation Module is reccomend for later model cars.

How do I determine whether I need the CANBUS cancellation module? 

Your vehicle warns you of any bulb failures is one way of determining whether your vehicle has a CANBUS system. 

What does the CANBUS Cancellation Module do, and why might I need one? 

Today modern vehicles have several Electronic Control Units which monitor the many sub system in today's cars. Things like Tyre Pressure Monitoring, Door Locks etc are all controlled via the CANBUS system.  Vehicles that are fitted with CANBUS Lighting System, monitor all bulbs in the vehicles system are functioning. When the factory bulbs are replaced with LED systems, the CANBUS will detect a variance in the expect current and believe there is a fault or a bulb out, which will either trigger a dash error or no power being delivered to the head lights until the fault is rectified. The CANBUS cancellation module tricks the computer in to thinking all is well within the system. 

Below are some popular 4x4 Models known to require the CANBUS module to operate our LED Conversion 

Ford Ranger PX MK1 2013-2015 

Mazda BT-50 2014 to Current 



Pattern Type H4 

What's in the box

What’s in the box

  • 2 x H4 CANBUS Cancellation Modules.  

Product Questions

Sort by ASC
Hi I need a h4 canbus wiring but can I also use this wiring for hid light.thanks
Hi there, I have an led kit for my 07 Ranger. Once installed it will not register that high beam is on when I put it on high beam, subsequently my lightbar wil not go. Will a canbus fix this problem? Cheers.
Hi, will this prevent my LED heaflights from flickering? In a 2013 jeep wrangler. Is this module basically just a resistor to trick the car computer?
You listed the 2014-2015 BT50 as needing the CANBUS module, does the 2016 bt50 also require it?
Hi, My drivers side headlight oN my 2014 ford ranger is out. Ford says this is because i have LED REVERSE LIGHTS. If i install this kit willnit recTify the Problem or do i need to get the error erased first? Does it come with instructions?

hi there can you supply ones that will work in my 92 Toyota 4runner? id like to run led headlights . thank you


Write a Review
H4 canabus
Review by Jim mux.
Great service excellent postage and they work a treat .Easy installation. (Posted on 28/05/2018)

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
* required fields